This website uses cookies. By continuing to browse you agree to our cookies policy.

Accept and close

Guided check valves - 402S

402S

high pressure, pumping, water distribution, industry

with PN25-40 flanges

Description :

PRESSURE PFA/PS in bar θ 100°
Up to 150 mm : PN 25-40 From 200 to 500 mm : PN 25
CASING : GJS ductile iron epoxy coated
Two undrilled bosses
CLOSING SYSTEM : DN40 brass, DN50 to 250 bronze, DN350 to 500 GJS ductile iron
GUIDE + SEAL : the same as valve type 402

DN		PFA	PS				Cat	Réf.	UV
"	mm	water	L1	L2	G1	G2	Cat	Réf.	UV
1^1/2	40	40	40	40	25	40	1	149B 2281GS	1
1^1/2	40	40	40	40	40	40	2	149B 018804	1
2	50	40	40	40	20	40	1	149B 2282GS	1
2	50	40	40	40	40	40	2	149B 018805	1
2^1/2	65	40	30	40	15	40	1	149B 2283GS	1
2^1/2	65	40	40	40	40	40	2	149B 018806	1
3	80	40	25	40	12	40	1	149B 2284GS	1
3	80	40	40	40	40	40	2	149B 018810	1
4	100	40	20	40	10	40	1	149B 2285GS	1
4	100	40	40	40	40	40	2	149B 018811	1
5	125	40	16	40	0.5	28	1	149B 2226GS	1
5	125	40	40	40	28	40	2	149B 018812	1
6	150	40	13	40	0.5	23	1	149B 2227GS	1
6	150	40	40	40	23	33	2	149B 018813	1
8	200	25	25	25	17	25	2	149B 2229GS	1
10	250	25	25	25	14	20	2	149B 2230GS	1
12	300	25	25	25	11	16	2	149B 2231GS	1
14	350	25	25	25	10	14	2	149B 2232GS	1
16	400	25	25	25	0.5	12	2	149B 2233GS	1
18	450	25	10	25	0.5	7	1	149B 24822	1
20	500	25	25	25	0.5	10	2	149B 2235GS	1

Documentations

Technical datasheet 402S

Mounting instructions

Related products

pumping, clear water

with PN10 flange

pumping, clear water

for submersible pumps, water distribution

with PN16 flanges

corrosive environmental or corrosive products

with PN10 flanges

pumping, hydrocarbons

with PN10 flange

pumping, clear water